TDS3052

Tektronix TDS3052 Oscilloscope

The Tektronix TDS3052 Digital Phosphor Oscilloscope offers 500 MHz of Bandwidth and 5 GS/s of sample rate on each channel, which provides the user with the execution necessary to visualize quick changing signals in a compact, battery-capable design. This model also incorporates 2 channels, 10 K points of Maximum Record Length, a Vertical Resolution of 9-Bits, a Vertical Sensitivity of 50 Ohms 1mV/div to 1V/div, a Vertical Accuracy of +/- 2%, and a Max Input Voltage of 50 Ohms and 150 VRMS with peaks at 400V. With dedicated front-board controls and 25 programmed estimations, the Tektronix TDS3052C is anything but difficult to operate, so the user can invest less energy re-figuring out how to utilize their oscilloscope and earn additional time on the job that needs to be done.

If the user needs to modify their estimations, they can check that the incoming signal to a piece of digital equipment meets its specifications. For example, the transition time from a low logic level (0.8 V) to a high logic level (2.0 V) must be 10 ns or less. When a noisy signal is shown on the oscilloscope and the user needs to know more about it because they speculate that the signal contains substantially more detail than they can see in the display, the best feature to use is the analyzing signal detail function. If the user needs to analyze the signal shape and ignore dc noise, to decrease irregular noise in the oscilloscope display, the user can implement this model’s separating function.