TDS3064B

Tektronix TDS3064B Digital Phosphor Oscilloscope

The Tektronix TDS3064B is a Digital Phosphor Oscilloscope with a WIDTH (or GLITCH), that triggers on pulse width less than, more prominent than, equivalent to, or not equivalent to a selectable time limit extending from 39.6 ns to 50 s. The Runt triggers on a pulse that crosses one edge, but neglects to cross a second limit before crossing the first once more. In this model, the Slew Rate triggers on pulse edge rates that are either speedier or slower than a set rate. Edges can rise, fall, or both. The Tektronix TDS3064B provides detached pulse triggering, which is required to perform DS1/DS3 media communications mask testing per ANSI T1.102 standards. The TDS3GV Communications Module has features such as: GPIB (IEEE 488.2) programmability, full talk/listen modes, and control of all modes, settings and estimations. The VGA is a monitor output for coordinate display on expansive VGA-prepared screens. The DB-15 female connector has a 31.6 kHz sync rate and is EIA RS-343A compliant.

This model has a function called Deskew. The Channel-to-channel deskew ±10 ns might be physically entered for better timing estimations and more precise math waveforms. This oscilloscope has many arithmetic operators like add, subtract, multiply, divide, and arbitrary math expressions*2. The Autoset is a single-button, programmed setup on selected input signal for vertical, horizontal, and trigger frameworks.

In this model, the Comm (requires TDS3TMT) provides disengaged pulse triggering required to perform DS1/DS3 broadcast communications mask testing per ANSI T1.102 standards. This model also has an alternate function, which sequentially utilizes every dynamic channel as a trigger source.

This model has a 600 MHz bandwidth, BW Limit to of 20,150 MHz, Time Base Range of 1 ns to 10 s/div, and 5 GS/s Test Rate on Each Channel.